Products - Pennsylvania

Products - Pennsylvania

Utility Sales Associates, Inc. is a manufacturer's representative company serving the utility industries in the states of Virginia, West Virginia, Maryland, Delaware, the District of Columbia, Pennsylvania, and New Jersey.

Listed below are the manufacturers we represent in Pennsylvania.

Representatives for this area

Tom Young

Tom Young

Email :
Phone : (814) 977-8004
Fred Johnson

Fred Johnson

Email :
Phone : (570) 599-5998

3M       Website

The 3M™ Dynatel™ Family provides leading products for accurate marking and locating of critical buried network features. Included are sophisticated systems that allow programming of identifying features into intelligent markers using RFID technology, and interfaces with GPS/GIS systems for accurate mapping.

  • EMS markers
  • Pipe and Cable Locators

American Wire Group
American Wire Group       Website

At AWG, we are Strategic Sourcing Specialists, committed and connected to the challenges of the Wire and Cable Industry. Offering a complete line of Collection System Underground Cables in 15KV-35KV TR-XLPE/EPR, Overhead Bare Aluminum T&D Conductors (ACSR/AAAC/AAC), Industrial Power Cables, Bare Copper Conductor, Copper Clad Steel, Static Wire, Guy Wire, Aluminum Clad Steel, Substation Control Cables, Fiber Optic Cables & Hardware and OPGW. AWG also provides traffic signal cable and lighting cables for municipalities.

  • Fiber Optic Cables and OPGW
  • Overhead and Underground Cables
  • Power Cables
  • Substation

Classic Connectors
Classic Connectors       Website

With ClampStar®, failing splices are repaired with NO power interruption and splice replacement is no longer necessary. ClampStar® installs in a few minutes, with a hot-stick or gloves. No mechanical grips, come-alongs, jumper cables or cutters are needed. And, ClampStar® meets ANSI C119.4 Class AA, extra heavy duty and PERMANENTLY restores both electrical and mechanical integrity on weathered conductors. There’s no need to cut power or lines and it easily installs over the existing splice. ClampStar® also increases ampacity allowing for system up-rates and is significantly safer than traditional splice replacements. ClampStar® is available in both rigid and flexible versions to accommodate various cable diameters for both transmission and distribution applications.


  • ClampStar (R) Bypass Connector

Conduit Repair Systems
Conduit Repair Systems       Website

Conduit Repair Systems, Inc. (CRS) manufactures split-duct conduit and other related split conduit products. CRS's products are specifically designed for Electrical, Cable TV, and Fiber Optic applications. CRS's split conduit and other products demonstrate superior impact strength and ultraviolet resistance while protecting cables or fiber optics from weathering.

  • PVC Split Duct Repair System

DCD Design & Manufacturing
DCD Design & Manufacturing       Website

At DCD Design & Manufacturing Ltd., we produce high quality Cable Installation, Directional Drilling, and Overhead Line Stringing Tools. DCD Design is driven by our customers' needs and by our own commitment to service those customers.

  • Cable Installation Tools
  • Duct Rodders

Durham       Website

Durham Company specializes in the manufacturing of Meter Sockets, Socket/Breaker and Switch Combinations, Metering Enclosures, Test Switches, Pad Mounted Enclosures and Instrument Transformers.

  • 600V IT's
  • Cabinets
  • Sockets
  • Test Switches

Electri-Glass       Website

For more than 36 years, ELECTRI-GLASS has built a reputation producing strong, durable products for the underground electrical distribution industry. Our commitment to you, our customer, is to continue to provide the best in materials, design and workmanship.

  • Fiberglass Box Pads
  • Ground Sleeves

Formex Manufacturing
Formex Manufacturing       Website

Formex® Manufacturing, Inc. began thermoforming quality plastic products in 1961. Our proprietary lines include 32 sizes of dock floats for the marine industry, various models of transformer pads, duct spacers, duct terminators and bore spacers for the utility market. In addition, Formex® Manufacturing, Inc. is a heavy gauge, custom thermoformer with the following capabilities: twin sheet forming with encapsulation, pressure forming (twin or single sheet), and all types of conventional single sheet vacuum forming techniques.

  • Spacers
  • Transformer Pads

Grid Sentry
Grid Sentry       Website

Grid Sentry has developed and deployed a state-of-the-art Smart Grid Sensor Platform "Smart" Electric Line Sensor
that give electric utilities situational awareness of assets and provide actionable data.

  • Smart Grid Sensor Platform

High Voltage Inc
High Voltage Inc       Website

High Voltage, Inc. specializes in the design and manufacture of high voltage test equipment used worldwide by utilities, testing service companies, electrical contractors, large industrials, and electrical apparatus OEMs. HVI produces the most technically advanced, most portable, and easiest to use products for high voltage proof, diagnostic evaluation, and preventive maintenance testing of electrical substation apparatus, aerial lifts, power cable, and other products designed to operate under medium or high voltage conditions.

  • High Voltage Test Equipment
  • Thumpers

IFD, Inc.
IFD, Inc.       Website

IFD Corporation was formed to develop, with utility partners, a reliable low cost sensor that would be suitable for detection and indication of internal arcing faults in distribution transformers. In 2002 we shipped our first sensor to a utility customer. Today, customers in Canada, the USA and around the world use and have come to trust our reliable technology. Our team development approach with innovative industry partners has delivered a practical solution for the distribution system of today’s, and tomorrow’s utilities.

  • Internal Fault Detector for Distribution XFMR’s

ILPEA Industries, Inc.
ILPEA Industries, Inc.       Website

ILPEA Industries was founded in 1978 by Andrew Holm, an entrepreneur interested in producing custom plastic extrusions for the appliance and construction industries. ILPEAs first customer was Maytag. Since that time, ILPEA has undergone many changes and very significant growth, but the mission has remained unchanged.

  • Corrugated Conduit
  • Guy Guards
  • U-Guard

Lewis Manufacturing
Lewis Manufacturing       Website

Lewis Manufacturing Company has been in business SINCE 1936. We strive to provide the highest quality American made products available. Our product lines continue to expand, and are tailored to meet the needs of the future. The products displayed on this website are some of our most popular, and are sure to please even in the toughest of applications.

  • Suspension Grips
  • Tarps
  • Wire Mesh Pulling Grips

Metalpol       Website

At METALPOL our mission is :To offer high-quality products along with excellent service and thus become our customers’ best option in the steel pole industry. To provide complete satisfaction to our clients and to our employees and their families. To maintain an efficient manufacturing process, thus enabling us to have competitive prices and a profitable operation.

  • Distribution and transmission
  • Steel poles for lighting

Mueller Electric
Mueller Electric       Website

Mueller Electric specializes in manufacturing high-quality standard and custom-made electric and electronic components such as clips, cables, cords, assemblies, test leads and accessories. In business since 1908, Mueller Electric is the inventor of the Alligator Clip and has been in  business since 1908.

  • Electric Hardware
  • Insulated Ground Clamp Assemblies
  • Test Leads

SBB, Inc.
SBB, Inc.       Website

Since 1989, SBB has been designing & manufacturing Emergency Towers, called Emergency Restoration System (ERS). These towers are modular towers made of aluminium that can be quickly deployed to restore power on damaged transmission lines of up to 1200 kV. They are also used for temporary needs such as construction by-passes or temporary lines to remote locations.

  • Temporary Transmission Towers

Sunrise Technologies
Sunrise Technologies       Website

Sunrise Technologies an affiliate of Electro Switch Corp., markets products under several brand names:

  • Photocontrols for Outdoor Lighting

Tekron       Website

Tekron is a global leader in providing high precision GPS and atomic clock time keeping technologies and solutions that enable synchronisation of advanced networks and services. These solutions are used to provide critical timekeeping in national power grids, as well as other civilian and military networks. Our customers are predominantly power utility network operators, telecom networks and enterprises such as banking and petroleum.

  • NTP/PTP Timing Solutions for Substations

Telescada       Website

Monitor, Alarm, Record, Communicate and Control

  • Electric Hardware
  • Gas Hardware

Uticom Systems, Inc.
Uticom Systems, Inc.       Website

Uticom Systems Inc., short for utility communications, has been solving graphics for harsh environments for over 20 years, with my personal experience spanning 27 years working with small and large companies.

  • Decals
  • Labels
  • Signs
  • Specialty Graphics

Utility Solutions, Inc
Utility Solutions, Inc       Website

Utility Solutions is a designer and manufacturer of hot line tools and products for the electrical power industry. Founded in 1990 by engineers with broad electrical distribution experience, Utility Solutions has accumulated an impressive list of innovative and patented products that directly relate to a lineman’s job.

  • Hot Line Tools

Utility Sales Associates, Inc.
Phone 804-608-8080     Fax 804-608-8088
© 2021 Utility Sales Associates, Inc. All rights reserved.